詳細信息
5*5.4cm 6.3V28A22uF 貼片電解電容
大量困存，長期現貨，提供免費送樣服務。
歡迎您通過旺旺或者是來電詢價。
| 適用溫度范圍 Applicable temperature range | −40~85℃ | ||||||
| 額定工作電壓范圍 Rated voltage range | 6.3~50VDC | ||||||
| 標稱電容量范圍 Nominal electric capacity range | 0.1~1500UF | ||||||
| 標稱電容量允許偏差 Nomial electric capacity allow deviation | ±20（120HZ/20℃） | ||||||
| 漏電流 Leakage current | 施加工作電壓2分鐘，LC≤0.01CV或3（UA）取較大值 | ||||||
| 損失角正切值 120HZ/20℃ Loss Angle tangent 120HZ/20℃ | 工作電壓 Working voltage | 6.3V | 10V | 16V | 25V | 35V | 50V |
| ¢4~¢6.3 | 0.26 | 0.22 | 0.18 | 0.16 | 0.13 | 0.12 | |
| ¢8~¢10 | 0.35 | 0.26 | 0.2 | 0.16 | 0.14 | 0.12 | |
| 低溫特性 阻抗比ZT/Z20(max) Low temperature characteristics Lmpedance ZT/Z20 than (Max) | UR(V) | 6.3 | 10 | 16 | 25 | 35 | 50 |
| Z-40℃/+20℃ | 8 | 6 | 4 | 4 | 3 | 3 | |
| 高溫負荷特性 Heat load characteristics | 標稱電容量變化率 Nominal electric capacity rate | 初始值的20％以內 The initial value of 20％ | |||||
| 損失角正切值 Loss Angle tangent | 不大于規范值200％ No greater than standard value 200％ | ||||||
| 漏電流值 Leakage current | 不大于規范值 No greater than standard value | ||||||
| 高溫儲存特性 Heat storage characteristics | 在85度的環境中存放1000小時后，恢復16H，電容器的CAP特性符合CAP 初始值的正負20％以內DF不大于初始值的200％LC不大于初始值的200％ In the environment of 85 degrees,capacitors store 1000 hours with the CAP,CAP of initial values of plus or minus 20％DF of initial values of not more than 200％LC is not more than the initial value of 200％ | ||||||
| 回流焊耐溫特性250度高溫時間不超 過30秒，在室溫下恢復到正常溫度后 Reflow temperature characteristics 250 degrees heat time No more than 30 seconds, in Room temperature returned to positive Often temperature after | 標稱電容量變化率 Nominal electric capacity rate | 初始值的10％以內 Less than 10％of the initial value | |||||
| 損失角正切值 Loss Angle tangent | 不大于規范值 No greater than standard value | ||||||
| 漏電流值 Leakage current | 不大于規范值 No greater than standard value | ||||||