| 1. SCOPE適用范圍 This specification covers the requirements for:“stereo jack” |
| 本規格書適用:“stereo jack”系列 |
| 2. Rating 額定值: DC 30V 0.5A |
| 3. CONSTRUCTION 構造 |
| 3.1 Shape and dimensions are subject to drawing. 形狀 尺寸依圖面確定． | |
| 3.2 All part not allowed to exist rust、crack and poor planting.各部分應無生銹、裂痕、電鍍不良現象． | |
| 4. Standard test conditions shall be 5 to 35℃ in temperature and 45 TO 85% inhumidity. |
| 溫度5～35℃,濕度45～85%標準狀態下測試。 |
| 5. Operating temperature range -40 to +70℃.溫度-40～+70℃ 環境內使用。 |
| Item項目 | Test condiction 測試條件 | | Performance 規格 | |
| 6. Electronical performance電氣性能 | | | | | |
| 6.1 | Contact | Being measured at 1 KHz small current | 100mΩ max. | | |
| resistance | contact resistance meter. | | | |
| 接觸阻抗 | 在1kHz小電流下測量。 | | 100毫歐以下。 | | |
| 6.2 | | Measurements shall be made following | | | |
| 5000 cycles of operation at a rate | | | |
| Insulation | across terminals and across terminals | 100MΩ min. | | |
| resistance | and frame for 1 minute. | | | |
| 絕緣阻抗 | 在端子之間和端子與殼之間加DC 500 V條件下,持續1分鐘測量。 | 100兆歐以上。 | | |
| 6.3 | | AC 500 V(50Hz or 60 Hz)shall be | | | |
| Withstand | applied across terminals and acoss | There shall be no breakdown. | |
| voltage | teminals and frame for one minute. | | | |
| 耐電壓 | 在端子之間和端子與殼之間加AC 500 V | 無擊穿現象出現. | | |
| (50Hz或60Hz)條件下,持續1分鐘測量。 | | | |
| 7. Mechanical performance機械性能 | | | | | | |
| 7.1 | | Insert plug gauge into the specimen | | Insertion force: | | |
| Insulation and | and extract for test. | | 插入力度: | 0.3KG-3KG | |
| extraction | And then measure the insertion and | | Extraction force: | | |
| force | extraction force. | | 拔出力度: | 0.3KG-3KG | |
| 插入力及拔出 | 用插頭插入插座和插頭拔出插座測量 | | | |