供應美國邦納激光傳感器PD45VP6C100Q
供應美國邦納激光傳感器PD45VP6C100Q
 
 
Overview
Convergent- and retroreflective-mode laser sensor delivers precise position detection, inspection and counting.
Powerful retroreflective models offer long-range retroreflective sensing.
Fixed-field technology in the convergent-mode models ignores objects beyond the maximum sensing distance.
Convergent models have precise 0.25 mm beam width at the convergent focus point.
Retroreflective models have a precise, narrow beam to sense small objects at close range or larger objects to 10.6 m.
Power supply is 10 to 30V dc, with NPN or PNP outputs
Models are available with compact lightweight housing (PD45 models) or with environmentally sealed housing (PD49 models).
 

Product Specifications

Supply Voltage and CurrentRange or FocusBeam Size at ApertureBeam DivergenceLaser ClassificationSupply Protection CiruitryOutput ConfigurationOutput RatingOutput Protection CircuitryOutput Response TimeDelay at Power-upRepeatabilitySpot Size at FocusAdjustmentsExtinguishing WireIndicatorsConstructionEnvironmental RatingConnectionsOperating ConditionsWeightApplication Note

10 to 30V dc (10% max. ripple) @ less than 20 mA (exclusive of load)

Laser Polazed Retroreflective:0.2-10.6 m†, range is specified using one model BRT-36X40BM retroreflector Convergent:50, 102, 203 or 305 mm, depending on model

Retroreflective:3.75 x 1.85 mm

Retroreflective:Approx. 1 milliradian

Class 2 safety (CDRH (FDA) 1040.10 and IEC 60875-1)

Protected against reverse polarity, over voltage and transient voltage

Solid-state complementary (SPDT):NPN (current sinking) or PNP (current sourcing), depending on model

150 mA max. (each output) OFF-state leakage current:less than 1 µA @ 30V dc ON-state saturation voltage:less than 0.3V @ 10 mA dc; less than 0.8V @ 150 mA dc

Protected against continuous overload or short circuit of outputs; Overload trip point greater than or equal to 220 mA

0.2 milliseconds ON/OFF

less than 1 second

50 microseconds Rep. Rate:20 KHz

0.25 mm

12-trurn sensitivity (Gain) adjustment potentiometer (clutched at both ends of travel)

Gray wire held "low" for laser operation; "high" to turn laser OFF; Low less than or equal to 1.0V dc; High greater than or equal to Vsupply -4.0V dc (less than 30V dc) or disconnect wire; 100 milliseconds delay upon enable

2 LED indicators:Green and Yellow Green ON steady:power ON Green flashing:output overload Yellow ON steady:light-operate (LO) output is energized Yellow flashing:Marginal excess gain

PD45:Housings are heat-resistant ABS, UL94-VO rated with acrylic lens cover PD49:Housings are sealed, heat-resistant ABS/polycarbonate alloy, UL94-VO rated with acrylic lens cover

PD45:NEMA 3; IEC IP54 PD49:NEMA 6; IP67

2 m or 9 m attached cable, or 150 mm pigtail with 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.

Temperature:-10° to +45° C Relative humidity:90% @ 50° C (non-condensing)

PD45: Sensor only:22 g Sensor and 2 m cable:62 g PD49: Sensor only:28 g Sensor and 2 m cable:68 g

False pulse may occur less than 1 second after power-up

美國邦納一級代理

邦納PLC

邦納傳感器

邦納觸摸屏

邦納機器視覺

More Detail:http://www.bannerengineering.com.cn

13725598753

QQ361982781