詳細信息
供應可視編程LCD液晶模塊 232接口LCD液晶模塊 MPU驅動液晶模塊
供應lcd液晶屏 可視化編程液晶屏 RS232接口液晶屏
外型尺寸：90.6x35.7x19.85
視域尺寸：60.2x18.0
點大小：0.40x0.40
點間距：0.44x0.44
控制器：SED1520+MCU
接口方式：RS232或I2C
The GM12232I-V02 comes equipped with the following features _ 122 x 32 pixel graphics display _ Text display using built in or user supplied fonts _ Contrast is adjustable by software control _ Backlighting is adjustable by software control _ Keypad interface _ RS-232 or I2C communications _ Extended voltage module available (-V). This module is equipped with a constant current source to ensure consistency in backlight brightness from unit to unit. Since this module has a voltage regulator, the contrast with remain consistent, regardless of the input voltage. The input voltage must be between 7-15 Volts for this module to operate. This manual describes the basic use and overview of the display. It also describes advanced functions, which may require soldering. We expect the user to be proficient with a soldering iron before attempting to modify the unit. Please be advised any damage resulting from soldering irons or modifications will not be covered under the Manufacturer's Warranty.
The GM12232I-V02 is designed as the display unit for an associated controller. The controller may be anything from a single board, special purpose micro-controller to a PC, depending on the application. This controller is responsible for what is displayed on the screen of the display. The display provides a simple command structure to allow both text and graphics to be transferred to the screen. Text fonts, as well as graphics if desired, are stored in the display's flash ROM and may be regarded as 'permanent' in that they survive power-off periods and do not change unless explicitly reprogrammed. The screen is backlit for low-light situations. Backlighting may be turned up or down under program control. Contrast is software adjustable to compensate for differing lighting conditions and viewing angles.
我公司可為廣大客戶開模制作各種根據自己的要求開發的TN LCD、HTN LCD、STN LCD、FSTN LCD產品。液晶屏工作溫度可選擇常溫0℃-50℃、寬溫-20℃-+70℃、超寬溫-45℃-+80℃，連接方式可選擇金屬管腳、斑馬紙、斑馬條的方式,玻璃可以選擇1.1毫米、0.7毫米、0.55毫米。開模時間短，開模費用低。產品價格合理、質量優良，可以降低您的采購成本,并確保產品品質優良、穩定。產品廣泛的應用于光閥、儀器儀表、數碼產品、計算器、倒車雷達、保健儀、家用電器、儀器儀表、電話、遙控器、醫療設備、電力設備等多個領域。
我公司生產的物美價廉的液晶屏（LCD）將使您的產品具有更大的競爭力。
聯系人：王山成 手機：18940868119
TEL：0411-84619565
FAX：0411-84619585
http://www.good-lcd.com
http://gb.good-display.com/
MSN:dlwsc1971@hotmail.com
QQ:870937456