Engineered Conductive Materials, LLC                                     Technical Data Sheet
     An Engineered Materials Systems, Inc. Company
                                                                                                                                                   EC-9519
               132 Johnson Drive                                                                                 
               Delaware, Ohio 43015-8699                                                                  UV Curable Encapsulant
               Tel: (740) 362-4444                                                                               
               Fax: (740) 362-4433                                                                              
               www.conductives.com
 
 
 
                                                                                                                        
 
 

DESCRIPTION

EC-9519is a UV curable surface mount device encapsulant.EC-9519is usually syringe applied over surface mount devices to help prevent surface migration and to offer physical protection.EC-9519offers good adhesion & holding properties to most rigid & flexible substrates.

 

ADVANTAGES

ü Excellent adhesion ü Superior flexibility

ü No dilution required ü Fast curing

 

TYPICAL UNCURED PROPERTIES

Color Viscosity Total Solids Content Density Flash Point VOC

Clear 4,000 CPS @ 25° C. 100 % 9.6 lbs/gallon 212oF (100oC) Tag Close Cup 0

 

TYPICAL CURED PROPERTIES

Hardness TemperatureRange

50 Shore D -40oC to 120oC

 
                                                                                                       
 
 
 
 
 
 
                                                                                                                                                  
 
EC-9519
TDS
Page 2
 
 

APPLICATION INFORMATION

EC-9519is usually applied by the use of a hand syringe or an automatic applicator.

 

CURE SCHEDULE

EC-9519The minimum cure energy recommended is 750 Millijoules per square centimeter.Complete cure can be confirmed by a crosshatch adhesion test.

 
 

CLEAN UP

EC-9519can be cleaned up with M.E.K (Methyl Ethyl Ketone) or any blend of solvents that will completely remove a cured film.

 

STORAGE AND HANDLING

Shelf life is twelve (12) months in an unopened container, stored below 70oF. Avoid exposure to direct sunlight. Avoid high temperature exposure.

 

HEALTH AND SAFETY

Use with adequate ventilation. Avoid skin contact. If ingested, consult a physician immediately. Consult the product Material Safety Data Sheet for additional information.

 

APPLICATION ASSISTANCE

ECM’s application specialists are available to assist you in production start-up withEC-9519. For more information, please call ECM at 1.740.362.4444.

 
 
 
 
 以上報價為樣板價，實際單價以電郵或電話確認為準！
 
 
 
 
(6-04, EC-9519, TZ, Rev 0)