1. General Description
This EPROM-Based 8-bit micro-controller uses a fully
static CMOS technology process to achieve higher
speed and smaller size with the low power
consumption and high noise immunity. On chip
memory includes 4K words of ROM, and 192 bytes of
static RAM.
2. Features
The followings are some of the features on the
hardware and software :
Fully CMOS static design
8-bit data bus
On chip EPROM size: 4.0 K words
Internal RAM size: 192 bytes
37 single word instructions
14-bit instructions
8-level stacks
Operating voltage: 2.5 V ~ 5.5 V (PRD Disable)
4.5 V ~ 5.5 V (PRD Enable)
Operating frequency: DC ~ 20 MHz
The most fast execution time is 200 ns under
20 MHz in all single cycle instructions except
the branch instruction
Addressing modes include direct, indirect and
relative addressing modes
Power-on Reset
Power edge-detector Reset
Power range-detector Reset
Sleep Mode for power saving
Capture, Compare, PWM module
Synchronous serial port with SCM
11 interrupt sources:
-External INT pin
-TMR0 timer, TMR1 timer, TMR2 timer
-A/D conversion completion
-Port B<7:4> interrupt on change
-CCP1, CCP2, SCM, USAR, USAT
A/D converter module:
-5 analog inputs multiplexed into one A/D
converter
-8 bit resolution
TMR0: 8-bit timer/counter
TMR1: 16-bit timer/counter
TMR2: 8-bit timer
4 types of oscillator can be selected by
programming option:
RC－Low cost RC oscillator
LFXT－Low frequency crystal oscillator
XTAL－Standard crystal oscillator
HFXT－High frequency crystal oscillator
On-chip RC oscillator based Watchdog Timer
(WDT)
22 I/O pins with their own independent
direction control
3. Applications
The application areas of this MDT10P73 range
from appliance motor control and high speed
auto-motive to low power remote
transmitters/receivers, pointing devices, and
telecommunications processors, such as Remote
controller, small instruments, chargers, toy,
automobile and PC peripheral … etc.
 
 

 
       我公司是臺灣麥肯一級代理商，價格合理，原裝正品！公司設有專門的軟件開發中心,擁有一批電子工程專業人才,有著雄厚的技術實力，能為廣大客戶提供強有力的技術支持和完善的售前售后服務; 同時極具竟爭力的產品價格和最短的開發周期,更是廣大客戶最為滿意的服務要求。 我們的目標是成為所在領域的行家里手,熟悉客戶方案需求,了解客戶的需求,以專業的精神,為客戶提供專業化的服務;堅持開放與合作的原則,與業界上下游廠商精誠合作,互惠互利,共同努力為客戶創造更大的價值。我們可以根據產品功能要求進行開發設計，單片機編程，PCB線路設計。根據產品要求進行開發設計。多年來致力于消費類電子產品的開發設計，擁有經驗豐富的工程設計人員，實力雄厚，品質技術上乘，價格特優！設計好程序后可以投掩摸