- 您現在的位置：買賣IC網 > PDF目錄62975 > 12IML10-05-3 1-OUTPUT 8 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | 12IML10-05-3 |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 8 W DC-DC REG PWR SUPPLY MODULE |
| 文件頁數： | 6/7頁 |
| 文件大小： | 173K |
| 代理商： | 12IML10-05-3 |
Board Mountable
DC-DC Converters
IML 10 Series
Edition 6/4.2000
6/7
AC-DC
front
end
DC-DC
con-
verter
Mains
Fuse
Battery
Earth
connection
Suppressor
diode
SELV
Earth
connection
+
–
~
10004
Fig. 6
Schematic safety concept. Use fuse, suppressor diode
and earth connection as per table: Safety concept leading
to an SELV output circuit
.
Table 6: Insulation concept leading to an SELV output circuit
Conditions Front end
DC-DC converter
Result
Supply
Minimum required grade
Maximum
Minimum required safety
Measures to achieve the
Safety status of
voltage
of isolation, to be provided DC output
status of the front end
specified safety status of the
the DC-DC
by the AC-DC front end,
voltage
output circuit
converter output
including mains supplied
from the
circuit
battery charger
front end 1
Mains
Basic
≤60 V
Earthed SELV circuit 2
Operational insulation, pro-
SELV circuit
≤250 V AC
vided by the DC-DC converter
ELV circuit
Input fuse 3 output suppressor
Earthed SELV
>60 V
Hazardous voltage
diode(s) 4, and earthed
circuit
secondary circuit
output circuit(s) 2
Double or reinforced
≤60 V
SELV circuit
Operational insulation, pro-
SELV circuit
vided by the DC-DC converter
>60 V
TNV-2 circuit
Supplementary insulation,
Double or reinforced insu-
based on the maximum input
lated unearthed hazardous
voltage, provided by the
voltage secondary circuit 5
DC-DC converter
1 The front end output voltage should match the specified input voltage range of the DC-DC converter.
2 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
3 The installer shall provide an approved fuse (type with the lowest rating suitable for the application) in the non-earthed input line di-
rectly at the input of the DC-DC converter (see fig.:
Schematic safety concept). For UL’s purpose, the fuse needs to be UL-listed. See
also:
Input Fuse.
4 Each suppressor diode should be dimensioned in such a way, that in the case of an insulation fault the diode is able to limit the output
voltage to SELV (<60 V) until the input fuse blows (see fig.:
Schematic safety concept).
5 Has to be insulated from earth by basic insulation according to the relevant safety standard, based on the maximum output voltage
from the front end.
相關PDF資料 |
PDF描述 |
|---|---|
| 12IMR15-03-2 | 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 12IMR15-051212-2 | 3-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 12IMR15-12-2 | 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 12IMR15-051515-2 | 3-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 12IMR15-1212-2 | 2-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 12IMR15-03-2 | 制造商:Power-One 功能描述:MELCHER IMR FAMILY - Bulk |
| 12IMR15-051212-2 | 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:3...15 Watt DC-DC Converter |
| 12IMR15-051515-2 | 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:3...15 Watt DC-DC Converter |
| 12IMR15-05-2 | 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:3...15 Watt DC-DC Converter |
| 12IMR15-1212-2 | 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:3...15 Watt DC-DC Converter |
發布緊急采購，3分鐘左右您將得到回復。