- 您現在的位置：買賣IC網 > PDF目錄44164 > LKP5661-5ERD8T 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE PDF資料下載
參數資料
| 型號： | LKP5661-5ERD8T |
| 元件分類： | 電源模塊 |
| 英文描述： | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| 封裝： | HEAT SINK, METAL, CASE K02, MODULE |
| 文件頁數： | 18/23頁 |
| 文件大小： | 534K |
| 代理商： | LKP5661-5ERD8T |
Cassette Style
AC-DC Converters
KP Series
Edition 01/01.2001
4/23
Rs ext
Ri
RNTC
Iinr p
Ui rms
Ci
04001
Input Fuse
A fuse mounted inside the converter protects the module
against severe defects.
Table 3: Fuse Specication
Module
Fuse type
Fuse rating
LKP 5000 1
slow-blow
SP T
4 A, 250 V
1 Fuse size 5
× 20 mm
Input Under-/Overvoltage Lock-out
If the input voltage remains below approx. 110 V AC or ex-
ceeds approx. 280 V AC an internally generated inhibit sig-
nal disables the output(s). When checking this function the
absolute maximum input voltage rating
Ui abs should be
considered! Between
Ui min and the undervoltage lock-out
level the output voltage may be below the value defined in
table:
Output data (see: Technical Information: Measuring
and Testing).
Input Transient Protection
A VDR together with the input fuse and a symmetrical input
lter form an effective protection against high input tran-
sient voltages.
Fig. 2
Equivalent circuit diagram for input impedance
Electrical Input Data
General Conditions
–
TA = 25
°C, unless T
C is specied.
– Pin 18 connected to pin 14,
Uo adjusted to Uo nom (option P); R input not connected.
Table 2: Input data
Input
LKP
Characteristics
Conditions
min
typ
max
Unit
Ui
Operating input voltage
Io = 0…Io nom
187
255
V AC 3
Ui nom Nominal input voltage
TC min…TC max
230
Ii
Input current
Ui nom, Io nom 1
1.25
Arms
Pi o
No-load input power
Ui min…Ui max
710
W
Pi inh
Idle input power
unit inhibited
2
3
Ri
Input resistance
TC = 25°C
480
m
RNTC
NTC resistance 2
3200
4000
Ci
Input capacitance
52.8
66
79.2
F
Ui RFI
Conducted input RFI
EN 55022
B
Radiated input RFI
Ui nom, Io nom
B
Ui abs
Input voltage limits
–400
400
V DC
(without damage)
–400
400
VP
1 With double output modules, both outputs loaded with Io nom.
2 Initial switch-on cycle. Subsequent switch-on/off cycles increase the inrush current peak value.
3 AC frequency range 47...63 Hz.
Inrush Current Limitation
The modules of the versions -5, -6, -7 incorporate an NTC
resistor in the input circuitry which - at initial turn on - re-
duces the peak inrush current value by a factor of 5...10 to
protect connectors and switching devices from damage.
Subsequent switch-on cycles within short periods will
cause an increase of the peak inrush current value due to
the warming-up of the NTC resistor. See also:
E option.
Inrush Current Peak Value
The inrush current peak value (initial switch-on cycle) can
be determined by following calculation:
Ui rms
√2
Iinr p = ––––––––––––––––
(
Rs ext + Ri + RNTC)
相關PDF資料 |
PDF描述 |
|---|---|
| LKP5661-5PD3 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| LKP5661-5PDDTB1 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| LKP5662-7EPD3 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| LKP5662-7ERD6B1 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| LKP5662-7ERD6TB1 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LKP5661-5R | 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 24V/24V 5.8A/5.8A 280W 15PIN - Bulk |
| LKP5662-7R | 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 24V/24V 280W 15PIN - Bulk |
| LKP5663-7ERG | 制造商:Power-One 功能描述: |
| LKP5740-6R | 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 50.5V TO 56.5V 4.5A 254W - Bulk |
| LKP5740-7R | 功能描述:線性和開關式電源 Euro-Cassette 231W (25.68V) Battery Charger RoHS:否 制造商:TDK-Lambda 產品:Switching Supplies 開放式框架/封閉式:Enclosed 輸出功率額定值:800 W 輸入電壓:85 VAC to 265 VAC 輸出端數量:1 輸出電壓（通道 1）:20 V 輸出電流（通道 1）:40 A 商用/醫用: 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:Rack 長度: 寬度: 高度: |
發布緊急采購，3分鐘左右您將得到回復。