- 您現在的位置：買賣IC網 > PDF目錄361037 > LMC6681AIN (NATIONAL SEMICONDUCTOR CORP) Low Voltage, Rail-To-Rail Input and Output CMOS PDF資料下載
參數資料
| 型號： | LMC6681AIN |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 運算放大器 |
| 英文描述： | Low Voltage, Rail-To-Rail Input and Output CMOS |
| 中文描述： | OP-AMP, 1000 uV OFFSET-MAX, 1.2 MHz BAND WIDTH, PDIP8 |
| 封裝： | PLASTIC, DIP-8 |
| 文件頁數： | 18/24頁 |
| 文件大小： | 750K |
| 代理商： | LMC6681AIN |
7.0 Compensating for Input
Capacitance
It is quite common to use large values of feedback resis-
tance with amplifiers that have ultra-low input current, like
the LMC6681/2/4. Large feedback resistors can react with
small values of input capacitance due to transducers, photo-
diodes, and circuits board parasitics to reduce phase
margins.
The effect of input capacitance can be compensated for by
adding a feedback capacitor. The feedback capacitor (as in
Figure 17), C
F
, is first estimated by:
or
R
1
C
IN
≤
R
2
C
F
which typically provides significant overcompensation.
Printed circuit board stray capacitance may be larger or
smaller than that of a breadboard, so the actual optimum
value for C
may be different. The values of C
should be
checked on the actual circuit. (Refer to the LMC660 quad
CMOS amplifier data sheet for a more detailed discussion.)
8.0 Spice Macromodel
A Spice Macromodel is available for the LMC6681/2/4. The
model includes a simulation of:
Input common-mode voltage range
Frequency and transient response
GBW dependence on loading conditions
Quiescent and dynamic supply current
Output swing dependence on loading conditions
and many more characteristics as listed on the macromodel
disk.
Contact the National Semiconductor Customer Response
Center at 1-800-272-9959 to obtain an operational amplifier
spice macromodel library disk.
Applications
Transducer Interface Circuits
A. PIEZOELECTRIC TRANSDUCERS
The LMC6681 can be used for processing of transducer sig-
nals as shown in the circuit below. The two 11 M
resistors
provide a path for the DC currents to ground. Since the resis-
tors are bootstrapped to the output, the AC input resistance
of the LMC6681 is much higher.
An input current of 80 fAand a CMRR of 82 dB causes an in-
significant error offset voltage at the output. The rail-to-rail
performance of the amplifier also provides the maximum dy-
namic range for the transducer signals.
B. PHOTODIODE AMPLIFIERS
Photocells can be used in light measuring instruments. An
error offset voltage is produced at the output due to the input
current and the offset voltage of the amplifier. The LMC6682,
which can be operated off a single battery is an excellent
choice for this application with its 80 fA input current and 0.5
mV offset voltage.
DS012042-15
FIGURE 17. Canceling the Effect of Input Capacitance
DS012042-24
FIGURE 18. Transducer Interface Application
DS012042-36
FIGURE 19. LMC6681 Used for Signal Processing
DS012042-26
FIGURE 20. Photodiode Amplifier
www.national.com
18
相關PDF資料 |
PDF描述 |
|---|---|
| LMC6681BIM | Low Voltage, Rail-To-Rail Input and Output CMOS |
| LMC6681BIN | Low Voltage, Rail-To-Rail Input and Output CMOS |
| LMC6682AIM | Low Voltage, Rail-To-Rail Input and Output CMOS |
| LMC6682AIMX | Low Voltage, Rail-To-Rail Input and Output CMOS |
| LMC6682AIN | Low Voltage, Rail-To-Rail Input and Output CMOS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LMC6681B1MX | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Low Voltage, Rail-To-Rail Input and Output CMOS |
| LMC6681BIM | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| LMC6681BIN | 制造商:Texas Instruments 功能描述: |
| LMC6682 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| LMC6682AIM | 制造商:Texas Instruments 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。