- 您現在的位置：買賣IC網 > Datasheet目錄56 > PC27.09.0100A (Taoglas Limited)ANTENNA 4-BAND GSM PCB W/CABLE Datasheet資料下載
參數資料
| 型號： | PC27.09.0100A |
| 廠商： | Taoglas Limited |
| 文件頁數： | 6/12頁 |
| 文件大?。?/td> | 1022K |
| 描述： | ANTENNA 4-BAND GSM PCB W/CABLE |
| 標準包裝： | 50 |
| 天線類型： | PCB 印制線 |
| 頻帶數目： | 4 |
| 頻率： | 800MHz，900MHz，1.8GHz，1.9GHz |
| VSWR： | 3.59，2.02，2.21，2.3 |
| 端子： | MMCX，帶 100mm 纜線 |
| 安裝類型： | 連接器 |
| 高度（最大）： | 0.8mm |
| 包裝： | 散裝 |
| 其它名稱： | 931-1050 |
?All Rights Reserved
Taoglas Limited, Unit 3 Enniscorthy Technology Centre, Enniscorthy, Co. Wexford, Ireland
www.taoglas.com
5.0 Environmental Conditions and Reliability
5.1 Environmental Conditions
5.1.1 Operation Temperature
-20?/SPAN>C to + 65?/SPAN>C
5.1.2 Storage Temperature
-30?/SPAN>C to + 75?/SPAN>C
5.1.3 Relative Humidity
40% to 95%
5.2 Reliability
Test Items
Procedure
Requirement
hermal Shock
Starting at -40 for 30minutes and then cycled to +85
to remain 30minutes (a complete cycle).
To repeat 5 complete cycles.
(Refer to IEC 68-2-14 Method Na)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Storage
Temperature
(Cold)
Samples must be put into -30癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Aa)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Storage
Temperature
(Dry Heat)
Samples must be put into +75癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Ba)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Operating
Temperature
(Cold)
Samples must be put into -20癈 chamber for 2
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Aa)
1. The value of return loss must met specification
during test/after test
2. No mechanical defects after test.
Operating
Temperature
(Dry Heat)
Samples must be put into +65癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Ba)
1. The value of return loss must met specification
during test/after test
2. no mechanical defects after test.
相關PDF資料 |
PDF描述 |
|---|---|
| PC29.07.0100A | ANTENNA PCB GSM WCDMA |
| PC29.09.0100A | ANTENNA PCB GSM WCDMA |
| PC30.07.0100A | ANTENNA 4-BAND GSM PCB |
| PC30.09.0100A | ANTENNA QUAD BAND CELL W/ CABLE |
| PC81.07.0100A.DB | ANTENNA ISM BAND PCB W/CABLE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PC27110100B | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:850/900/1800/1900MHz GSM PCB Antenna w/100mm 0.81mm diameter mini-coaxial cable |
| PC2712 | 制造商:Tamura Corporation of America 功能描述: |
| PC2716 | 制造商:Tamura Corporation of America 功能描述: |
| PC2724 | 制造商:Tamura Corporation of America 功能描述: |
| PC2728 | 制造商:Tamura Corporation of America 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。