|
|
RT/duroid? 6002, 6202, 6006, 6010 PTFE/Ceramic Laminates
Offered in four grades. RT/duroid? 6002, 6202, 6006 and 6010 laminates are ceramic-PTFE composites offering superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable. |
|
ULTRALAM? 3000 Series Liquid Crystalline Polymer Circuit Materials
A double-clad copper laminate, with the temperature resistant liquid crystalline polymer as a dielectric film.
|
|
LONGLITE? Flex 200 Adhesiveless Materials
Single sided, adhesiveless laminates specifically designed for thinner flex circuit constructions. |
|
|
LONGLITE? Flex 300 Adhesiveless Series
Thin dielectric, double-clad, adhesiveless laminates designed to meet todays high performance inteconnection requirements. |
|
|
R/flex? 1000 Circuit Materials for Long-life Dynamic Flexing
High performance polyimide film-based laminates with rolled annealed copper foil and coversheets ideally suited for constructing single and double sided flexible circuitry. |
|
|
R/flex? 1100 Circuit Materials - High Temperature Laminates
High performance flexible circuit material system, designed for use in harsh, high temperature environments. |
|
|
R/flex? 1500 Assembly Adhesive
Unsupported (without backing) dry film adhesive especially designed to meet the demanding requirements of electronics assembly operations. |
|
|
R/flex? 2001 Laminates and Coverfilms
High performance circuit material system, especially formulated for high peel strength and IPC-FC-241 and 232/1 performance. |
|
|
R/flex? 2005 Laminates and Coverfilms
Material system consisting of polymide film based laminates with rolled annealed copper foil, cover sheet, bonding film. Delivers:
- wide process latitude
- high bond strength
- solvent resistance
- improved electrical performance in critical applications due to low moisture absorption and closely controlled adhesive thickness
|
|
|
R/flex? 8080 Liquid Photoimageable Covercoat
Enables ultra-fine patterns needed for todays high-density flexible printed circuits Designed for manufacturing high precision patterns unattainable through conventional screen printing. Provides uniform coverage and reliable performance in mass production processes. |
|
|
R/flex CRYSTAL? Laminates and Coverlayers
Flame retardant epoxy adhesive technology base on a new film Copper-clad laminates with rolled annealed and electrodeposited copper foils well suited for constructing single and double sided flexible circuitry. |
|
|
R/flex JADE? Series
Flexible copper-clad laminate material – the next generation of industry-leading R/flex CRYSTAL? epoxy Halogen-free flame retardant flexible material engineered especially to meet increasing environmental requirements without compromising performance in todays demanding flexible circuit designs. |
- HT-1200 series - General Purpose Silicone Rubber
- HT-6000 Series - Peformance Solid Silicones
PORON? Microcellular Urethanes for Gasketing and Sealing Products
- PORON? 4701-30
Very soft, easily compressed for use where flexibility is a key requirement. Standard available thickness range from 0.021"
- PORON? 4701-40
Soft material for a wide variety of applications. Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
- PORON? 4701-41
Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements. Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
- PORON? 4701-50
Firm material used for managing high energy impact with gasketing needs. Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm).
- PORON? 4701-60
Very firm material used for energy management solutions for enclosure gasketing applications. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm)
- PORON? 4790-92
Extra soft, slow rebound with the lowest closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).
- PORON? Soft Seal
Designed for superior sealing at 6 pounds per cubic foot, this material is the lowest density offering in the PORON urethane product line.
- PORON? ThinStik? 92-12 Series
PORON ThinStik is an all-in-one solution, combining Rogers’ industry leading 92-12 PORON Urethane with a pressure-sensitive adhesive layer built right into its construction. This innovation enables higher compressibility than traditional laminated adhesive constructions to help designers meet the demands of ultra-thin gap-filling applications.
PORON? Microcellular Urethanes for Gasketing and Sealing Products
- PORON? 4701-30
Very soft, easily compressed for use where flexibility is a key requirement. Standard available thickness range from 0.021"
- PORON? 4701-40
Soft material for a wide variety of applications. Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
- PORON? 4701-41
Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements. Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
- PORON? 4701-50
Firm material used for managing high energy impact with gasketing needs. Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm).
- PORON? 4701-60
Very firm material used for energy management solutions for enclosure gasketing applications. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm)
- PORON? 4790-92
Extra soft, slow rebound with the lowest closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).
- PORON? Soft Seal
Designed for superior sealing at 6 pounds per cubic foot, this material is the lowest density offering in the PORON urethane product line.
- PORON? ThinStik? 92-12 Series
PORON ThinStik is an all-in-one solution, combining Rogers’ industry leading 92-12 PORON Urethane with a pressure-sensitive adhesive layer built right into its construction. This innovation enables higher compressibility than traditional laminated adhesive constructions to help designers meet the demands of ultra-thin gap-filling applications.
PORON Medical? Urethanes Products
- DermaBak? Advanced Dermal Materials
Specifically designed for use in wound dressing backings, DermaBak foam membranes provide long-term comfort, good conformability and breathability, and low coefficients of friction with minimum staining and soiling. These materials can also be used in transdermal patches, IV site dressings, and EKG pads.
- PORON Medical? Urethane - Firm - Energy Absorbing
PORON Medical? Urethanes offer high-energy return and excellent impact absorption.
- PORON Medical? Urethane - Slow Recovery - Custom Contouring
PORON Medical? Slow Recovery urethane is a unique custom contouring material. This material rebounds slowly when compressed, which results in a custom fit or contour during each use. The material will continue to return to its original shape when not in use. Slow Recovery is available in Soft, Very Soft, Firm and Very Firm.
- PORON? 4708 Soft Cushioning
PORON 4708 Soft Cushioning materials have a density of 15 pounds per cubic foot.
- PORON? 4708 Soft Supporting
PORON 4708 Soft Supporting materials have a density of 20 pounds per cubic foot. |
會員等級 
會員年限
