- 您現在的位置：買賣IC網 > PDF目錄363898 > W78E52C (WINBOND ELECTRONICS CORP) 8-BIT MICROCONTROLLER PDF資料下載
參數資料
| 型號： | W78E52C |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 8位微控制器 |
| 英文描述： | 8-BIT MICROCONTROLLER |
| 中文描述： | 8位微控制器 |
| 文件頁數： | 4/22頁 |
| 文件大小： | 305K |
| 代理商： | W78E52C |
W78E52C/W78E052C
- 4 -
4. PIN DESCRIPTION
SYMBOL
DESCRIPTIONS
EA
EXTERNAL ACCESS ENABLE
: This pin forces the processor to execute out of
external ROM. It should be kept high to access internal ROM. The ROM address and
data will not be presented on the bus if
EA
pin is high and the program counter is
within on-chip ROM area.
PSEN
PROGRAM STORE ENABLE
:
PSEN
enables the external ROM data onto the Port 0
address/ data bus during fetch and MOVC operations. When internal ROM access is
performed, no
PSEN
strobe signal outputs from this pin.
ADDRESS LATCH ENABLE
: ALE is used to enable the address latch that separates
the address from the data on Port 0.
RESET
: A high on this pin for two machine cycles while the oscillator is running resets
the device.
CRYSTAL1
: This is the crystal oscillator input. This pin may be driven by an external
clock.
CRYSTAL2
: This is the crystal oscillator output. It is the inversion of XTAL1.
GROUND
: Ground potential
POWER SUPPLY
: Supply voltage for operation.
PORT 0
: Port 0 is a bi-directional I/O port which also provides a multiplexed low order
address/data bus during accesses to external memory. The Port 0 is also an open-
drain port and external pull-ups need to be connected while in programming.
PORT 1
: Port 1 is a bi-directional I/O port with internal pull-ups. The bits have alternate
functions which are described below:
T2(P1.0): Timer/Counter 2 external count input
T2EX(P1.1): Timer/Counter 2 Reload/Capture control
PORT 2
: Port 2 is a bi-directional I/O port with internal pull-ups. This port also provides
the upper address bits for accesses to external memory.
PORT 3
: Port 3 is a bi-directional I/O port with internal pull-ups. All bits have alternate
functions, which are described below:
RXD(P3.0) : Serial Port receiver input
TXD(P3.1) : Serial Port transmitter output
INT0
(P3.2) : External Interrupt 0
INT1
(P3.3) : External Interrupt 1
T0(P3.4) : Timer 0 External Input
T1(P3.5) : Timer 1 External Input
WR
(P3.6) : External Data Memory Write Strobe
RD
(P3.7) : External Data Memory Read Strobe
PORT 4:
Another bit-addressable bidirectional I/O port P4. P4.3 and P4.2 are alternative
function pins. It can be used as general I/O port or external interrupt input sources
(
INT2
/
INT3
).
ALE
RST
XTAL1
XTAL2
V
SS
V
DD
P0.0
P0.7
P1.0
P1.7
P2.0
P2.7
P3.0
P3.7
P4.0-P4.3
相關PDF資料 |
PDF描述 |
|---|---|
| W78E054C | 8-BIT MICROCONTROLLER |
| W78E54C | 8-BIT MICROCONTROLLER |
| W78E058B | 8-BIT MICROCONTROLLER |
| W78E058B40DL | 8-BIT MICROCONTROLLER |
| W78E058B40FL | 8-BIT MICROCONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W78E52C_06 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W78E52P-16 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller |
| W78E52P-24 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller |
| W78E52P-33 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller |
| W78E52P-40 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller |
發布緊急采購，3分鐘左右您將得到回復。