- 您現在的位置：買賣IC網 > PDF目錄363900 > W78LE58P-24 (WINBOND ELECTRONICS CORP) 8-BIT MICROCONTROLLER PDF資料下載
參數資料
| 型號： | W78LE58P-24 |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 8-BIT MICROCONTROLLER |
| 中文描述： | 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQCC44 |
| 封裝： | PLASTIC, LCC-44 |
| 文件頁數： | 13/31頁 |
| 文件大小： | 426K |
| 代理商： | W78LE58P-24 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁當前第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁
Preliminary W78LE58
Publication Release Date: June 2000
- 13 -
Revision A1
In-System Programming Control Register (CHPCON)
CHPCON (BFH)
BIT
7
NAME
SWRESET
(F04KMODE)
FUNCTION
When this bit is set to 1, and both FBOOTSL and FPROGEN are set to 1. It
will enforce microcontroller reset to initial condition just like power on reset.
This action will re-boot the microcontroller and start to normal operation. To
read this bit in logic-1 can determine that the F04KBOOT mode is running.
Reserve.
Reserve.
ENAUXRAM
1: Enable on-chip AUX-RAM.
0: Disable the on-chip AUX-RAM
0
Must set to 0.
0
Must set to 0.
FBOOTSL The Program Location Select.
0: The Loader Program locates at the 32 KB APROM. 4KB LDROM is
destination for re-programming.
1: The Loader Program locates at the 4 KB memory bank. 32KB APROM is
destination for re-programming.
FPROGEN MTP-ROM Programming Enable.
= 1: enable. The microcontroller enter the in-system programming mode after
entering the idle mode and wake-up from interrupt. During in-system
programming mode, the operation of erase, program and read are
achieve when device enters idle mode.
= 0: disable. The on-chip flash memory is read-only. In-system
programmability is disabled.
6
5
4
-
-
3
2
1
0
F04KBOOT Mode (Boot From LDROM)
By default, the W78LE58 boots from APROM program after a power on reset. On some occasions,
user can force the W78LE58 to boot from the LDROM program via following settings
.
The possible
situation that you need to enter F04KBOOT mode when the APROM program can not run properly
and device can not jump back to LDROM to execute in-system programming function. Then you can
use this F04KBOOT mode to force the W78LE58 jumps to LDROM and executes in-system
programming procedure. When you design your system, you may reserve the pins P2.6, P2.7 to
switches or jumpers. For example in a CD-ROM system, you can connect the P2.6 and P2.7 to PLAY
and EJECT buttons on the panel. When the APROM program fails to execute the normal application
program. User can press both two buttons at the same time and then turn on the power of the
personal computer to force the W78LE58 to enter the F04KBOOT mode. After power on of personal
computer, you can release both buttons and finish the in-system programming procedure to update
the APROM code.
In application system design, user must take care of the P2, P3, ALE,
EA
and
PSEN pin value at reset to prevent from accidentally activating the programming mode or
F04KBOOT mode.
相關PDF資料 |
PDF描述 |
|---|---|
| W78LE58 | 8-BIT MICROCONTROLLER |
| W78LE58-24 | 8-BIT MICROCONTROLLER |
| W78LE58F-24 | 8-BIT MICROCONTROLLER |
| W78LE812 | 8-BIT MTP MICROCONTROLLER |
| W78LE812F-24 | 8-BIT MTP MICROCONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W78LE812 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W78LE812_06 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W78LE812-24 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MTP MICROCONTROLLER |
| W78LE812F-24 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MTP MICROCONTROLLER |
| W78LE812P-24 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MTP MICROCONTROLLER |
發布緊急采購，3分鐘左右您將得到回復。